DSC Fiber-Tec Carpet Protector 4 Gallon/Case

Fiber-Tee (previously known as Fiber-Tee 1:4) is a concentrated water based carpet and upholstery protector formulated for ease of use. Fiber-Tee protects against both oil and water based stains and repels dry soil, leaving a protected surface that resists reoccuring soils and stains. With no fluorocarbons or solvents, Fiber-Tee is safe to use in all indoor environments and can be applied without fear of damage to the carpet or upholstery one is working with.
DIRECTIONS:
Dilute 1 :4 (32 oz. per gallon) for use on damp carpet. Get 5 gallons of RTU protector using 1 gallon of Fiber-Tee to 4 gallons of water. For dry carpet, dilute the RTU solution 1 :1 to make 2 gallons of new mixture.
Apply Fiber-Tee with a low-pressure, non-atomizing sprayer. Be sure that the fibers or fabric is saturated (damp to the touch) when applying. Fibre-Tee will dry clear and works the best after letting cure for 24 hours after drying. To test if the area is still protected, lightly mist cold water on the carpet. If the water stays on top of the fibers, then the carpet is still protected.

This item is a vendor stocked item. If your total order meets this vendor's minimum order it will ship direct to you. All machines are ship direct unless not allowed by vendor.